Maintance; Cleaning Pad; Fan, Sensors And Squeegees - Cleanmate S 5000 User Manual

4. Maintance

Before performing cleaning and maintance on CC901, Power OFF and unplug CC901 from the glasses.

4.1 Cleaning Pad

Turn CC901 over and remove the Cleaning Pad. Soak the Cleaning Pad in 20℃, clean water for 2 minutes. Hand
wash with mild detergent and lay flat to dry. Allow it to dry completely before re-attaching it to CC901 .
CAUTION :
Do NOT use a wet Cleaning Pad on CC901 or it may slip on the window. Washing the Cleaning Pad regularly can
extend its service life. If the Cleaning Pad becomes worn or no longer fits properly within the velcro area, replace it
with a new one to achieve best cleaning performance.
4.2 Unit Bottom Maintance
Fan
Turn CC901 over and wipe any debris from
the Fan with a dry cloth to maintain suction
well.
Edge Detection Sensors
Turn CC901 over and wipe the five Edge
Detection Sensors clean with a dry cloth to
maintain their effectivess.
Side Rollers
Turn CC901 over and wipe the four Side
Rollers with dry cloth to maintain their
effectivess.
Squeegees
Turn CC901 over and wipe the squeegees
with a dry cloth to maintain their effectivess.
10