Pause - Cleanmate S 5000 User Manual

3. Operating CC901
" N " Cleaning Mode is Best
for tall windows.
CC901 cleans in an " N " path.
CAUTION: If the remote control not able to command the CC901 unit. Please check below steps matc
hcode for CC901 and the remote control.
Follow above preparation steps and stick the CC901 onto window glass.
1. Press the CC901 left rear bumper without release, at the same time press the START/PAUSE button on
robot handle. The START/PAUSE button will begin twinkles between blue and red light. Then release your
two hands.
2. Press the " Z " and "Repeat Clean" button on the remote control at the same time.
3. The START/PAUSE button will turns to solid red light. At the same time the speaker will buzz. It means
the remote control successfully matchcode with robot cleaner.

3.8 Pause

Pause CC901 during cleaning by pressing the
START/PAUSE button on the robot or on the
Remote Control.
Direct CC901 to move forward, backward,
left and right using the Direction Control
stick on the Remote Control when Paused.
CC901 cleans when the Direction Control
stick are used. Switch to a different Cleaning
Mode using the Cleaning Mode Buttons
on the Remote Control when Paused.
8
" Z " Cleaning Mode is best
for wide windows. CC901
cleans in a " Z " path.