Sony DCZ-50P Operating Instructions

Operation
Changing the Camera Direction
This unit allows you to flip up the camera through 90
degrees. You can shoot materials pasted on the wall or
even yourself. If you have removed the closeup lens,
the lens and the object must be 80 cm (31 1 / inches) or
2
more apart.
Closeup lens
Shooting a three-dimensional object
To shoot and display a three-dimensional object, let
down the camera stand. You can also shoot it from one
angle or from the top.
Let down the camera stand.
Shoot the object
from the top.
Shoot the object
from one angle.
Note
The auto-focus may not function properly for objects
that have many small characters or little shading and
gradation. Zoom the object using the Zoom switch.
Printed in Japan
Specifications
Color system PAL color system
Pickup device 1/3" interline transfer method, CCD
(Charge Coupled Device)
Resolution Horizontal: 450 TV lines
Vertical: 400 TV lines
437,000, 752 × 582 (H/V)
Picture elements
300 × 225 mm (at wide-angle)
Filming range
25 × 19 mm (at telephoto)
×12 power zoom optical lens
Lens
Focus Auto
Iris Auto
White balance Auto
Light Arm light: 4W fluorescent lamp (1)
Output connector VIDEO OUT (Phono connector) (1)
1 Vp-p, 75 Ω, sync negative
S VIDEO OUT (4-pin mini DIN)
(1)
Y: 1 Vp-p, 75 Ω
C: Burst 0.3 Vp-p, 75 Ω
Power requirements
230 V AC 50/60 Hz
Power consumption
10 W
Dimensions After set up: Approximately
335 × 525 × 355 mm (w/h/d)
× 20 × 14 inches)
(13 1 / 3 /
4 4
After collapsed: Approximately
335 × 70 × 550 mm (w/h/d)
× 2 × 21
(13 1 / 7 / 3 / inches)
4 8 4
Mass. Approximately 4.1 kg (9 lb 1 oz)
Supplied accessories
AC power cord 2 m (6.6 ft)
Operating Instructions (1)
The design and specifications are subject to change
without notice.
Document Camera
Stand
Operating Instructions
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
DCZ-50P
3-864-205-21(1)