Mounting To Sensor Mounting Bracket (Optional) - Panasonic EX-21 Series User Manual

3-2 Mounting to sensor mounting bracket (Optional)

Sensor mounting brackets (optional) are available. In case the sensor is mounted on a
sensor mounting bracket the tightening torque should be 0.5N·m or less.
Sensor mounting bracket for front sensing type
MS-EX20-1
Material: Stainless steel (SUS304)
Two M3 (length 5mm) pan head screws
[stainless steel (SUS304)] are attached.
Sensor mounting bracket for side sensing type
MS-EX20-2
Material: Stainless steel (SUS304)
Two M3 (length 14mm) screws with washers
[stainless steel (SUS304)] are attached.
MS-EX20-5 )RU WKUXEHDP W\SH (;
Swivel: 360° rotation
Material: Die-cast zinc alloy
Height adjustment: Approx. 15mm
Material: Nylon 6
Two M3 (length 12mm) screws with washers [stainless steel (SUS304)],
one M3 (length 10mm) hexagon-socket-head bolt [stainless steel (SUS304)],
one M3 hexagon nut [stainless steel (SUS304)] are attached.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
MS-EX20-3
Material: Stainless steel (SUS304)
Two M3 (length 5mm) pan head screws
[stainless steel (SUS304)] are attached.
MS-EX20-4
Material: Stainless steel (SUS304)
Two M3 (length 14mm) screws with washers
[stainless steel (SUS304)] are attached.