Quick Number; Security; Fast Dialling; Bluetooth - D-Link DWR-720/PW User Manual

10.6 Quick number
You can set the M1 – M4 quick dial keys (located on the face of the phone) by:
To Edit, select the M# and press [OK]. Input the number and select [Save][Save].
If you have the number saved in your Contacts, press [Save][From contact]Choose the
number[OK][Save][Save].
To delete, select the M# and press [OK]Clear all numbers[Save][Save].
10.7 Security
Set up SIM card lock: Set SIM PIN lock to on or off, or modify SIM PIN. Note that the SIM PIN number is issued by
your network provider and is shown on your Complete SIM card. If a SIM PIN is set, it will be indicated with a tick.
10.8 Fast dialling
You can set Numbers or Contacts to have speed dial functions here. This allows you to dial a number by pressing
and holding down the corresponding numeric key in the Home Screen. To set this, select the number position of
where you wish to set the speed dial and press [OK]  Input the number then  [Save]  [Save].
If you have the number saved in your Contacts, press [Save][From contact]Choose the
number[OK][Save][Save].
To delete, select the M# and press [OK]Clear all numbers[Save][Save].
10.9 Bluetooth
The phone can pair to other Bluetooth supported devices for file transfer, speaker, or headset etc.
Available Options:
‐ Set Bluetooth On or Off
‐ Set Visibility On or Off
‐ Scan for available Bluetooth devices in area
How to pair with another device
‐ [Menu][Settings][Bluetooth][OK][On][OK]
‐ Select the device which you wish to pair with by scrolling through the
Available devices list with [Up/Down]  [OK]  [Pair]
‐ The phone will provide you with a pairing code, make sure the same pairing
code is displayed on the pairing device.
‐ If the pairing code match, press [Pair] on both the Phone and pairing device
Back to Table of Contents
If you have a SD Card inserted in the Phone, you can transfer files between the Phone and another device. Make
sure the Phone is paired successfully with the device which you wish to transfer to/from and there is sufficient
memory on the SD card.
Use this function if you wish to restore the phone back to factory settings. All personal information, data stored will
be erased and you cannot reverse this action.
To do this navigate [Menu][Settings][Factory data reset][Erase everything][OK]
The phone will now proceed to erase and restore the phone back to factory settings, during this process the phone
will reboot a few times. This process should take about 1‐2 min.
Here you can view the Phone's information such as Status, Model number, Android version, Baseband version,
Kernel version and Build number
To view additional information such as My Phone Numbers, IMEI, IP address, Bluetooth address, Wi‐Fi MAC address
and Up time, Select [Menu][Settings][Status]
27
Back to Table of Contents
‐ If the device paired doesn't have a screen, there won't be a pairing code to
confirm
‐ To end the connection, select from Paired Devices [OK][Unpair][OK]
10.10 Factory Data Reset
10.11 Phone Info
11. FM Radio
In the home screen, select [Menu]  [FM Radio]  [OK]
Note: When referring to [OK], it is generally the left soft key located above the
green dial key
The radio will now be activated
‐ Search: Search for available radio stations in your area, the stations will be
listed in the Channel list
‐ Channel list: List of searched radio stations available in your area
‐ Add to Favourite: Add or remove the radio station from favourite (shown
with a star)
‐ Exit: Close the Radio function (If you press Back, the radio will continue to
operate in the background)
28