Windows
If the Found New Hardware or Found New
Hardware Wizard screen appears:
1
Remove the USB cable connected to
your computer.
The screen may close. In this case,
proceed from
.
2
Click Cancel to quit the screen.
3
Proceed from
.
1
(A)
Press the ON button (A) to TURN
OFF THE MACHINE.
•
Operating noise continues for about
25 seconds until the machine turns
off. Make sure that the POWER
lamp stops fl ashing.
1
2
Turn on the computer, then insert the Setup
CD-ROM into the CD-ROM drive.
The setup program should run automatically.
Windows Vista
Go to Step
Windows XP/2000
Go to Step
•
If the program does not start automatically,
double-click the CD-ROM icon on the computer.
When the CD-ROM contents appear, double-
click MSETUP4.EXE .
4
2
3
5
.
.
9