Install Rechargeable Batteries; Place The Handset On The Charging Cradle; Configure Your Phone - Philips CD145 User Manual

Note
The line adaptor may not be
attached to the line cord. In
this case, you have to connect
the line adaptor to the line
cord first before plugging the
line cord to the line socket.
3.2 Install rechargeable
batteries
Your CD145 is supplied with
two rechargeable batteries.
Before using the handset, install
the batteries into the handset
and fully charged them up.
1 Slide out the battery cover
2 Place the batteries as
Getting started
indicated in the battery
compartment and replace
the battery cover.
3.3 Place the handset on
the charging cradle
Charge the handset for at least
24 hours before using it for the
first time.
When the battery is fully
charged, the talk time of your
CD145 is approximately 12
hours and the standby time is
approximately 120 hours.
Place the handset on the
1
charging cradle of the base
station.
When the handset is fully
2
charged,
3.4 Configure your
phone
Before using your CD145, you
need to configure it according
to the country of use.
Depending on your country,
country selection screen may
not appear. In that case, you do
not need to select the country
code to configure your phone.
After charging it for a few
minutes, the country code
selection screen appears.
Follow these steps to configure
your phone:
is displayed.
13