Assembly - Husqvarna LC 219 Operator's Manual

• If the maintenance is not done correctly and
regularly, the risk of injury and damage to the
product increases.
• Only do the maintenance as given in this owner's
manual. All other servicing must be done by an
approved Husqvarna service agent.
Introduction
WARNING: Before you assemble the
product, you must read and understand the
safety chapter.
WARNING: Remove the spark plug cable
from the spark plug before you assemble the
product.
To assemble the handle
1. Attach the lower handle with 2 screws and nuts on
each side of the product.
2. Lift the upper handle until it aligns with the lower
handle. Tighten the knobs.
CAUTION: Be careful and do not cause
damage to the cables when you lift the
upper handle.
6
• Let an approved Husqvarna service agent do
servicing on the product regularly.
• Replace damaged, worn or broken parts.

Assembly

3. Put the wires in the cable brackets. Make sure that
the wires are not twisted. Attach the cable brackets
to the handle.
To assemble the grass catcher
1. Put the grass catcher frame into the fabric grass
bag. Make sure that the handle on the grass catcher
frame is on top of the grass bag.
2. Attach the grass bag to the grass catcher frame with
the clips found on the fabric bag edge.
1095 - 002 -