Power Requirements; Using Batteries; Using An Ac Adaptor - Yamaha PSR-E360 Owner's Manual

Setting Up

Power Requirements

Although the instrument will run either from an AC adaptor or batteries, Yamaha
recommends use of an AC adaptor whenever possible. An AC adaptor is more
environmentally friendly than batteries and does not deplete resources.

Using an AC Adaptor

Connect the AC adaptor in the order shown in the illustration.
DC IN jack
1
(page 9)
WARNING
• Use the specified AC adaptor (page 15) only. Using the wrong AC adaptor can result in
damage to the instrument or overheating.
WARNING
• When using the AC adaptor with a remov-
able plug, make sure to keep the plug
attached to the AC adaptor. Using the
plug alone can cause electric shock or
fire.
• If the plug is accidentally removed from
the AC adaptor, slide it back in until it
clicks into place, taking care to avoid
touching any internal metal parts. To
avoid electric shock, short circuit or dam-
age, also be careful that there is no dust
between the AC adaptor and plug.
CAUTION
• When setting up the product, make sure that the AC outlet you are using is easily accessi-
ble. If some trouble or malfunction occurs, immediately turn the power off and disconnect
the plug from the outlet.
NOTE
• Follow the order shown above in reverse when disconnecting the AC adaptor.
6
PSR-E360 Owner's Manual
2
AC
AC outlet
adaptor
Plug
Slide the plug
as indicated.
The shape of the plug differs depending
on your area.

Using Batteries

This instrument requires six "AA" size, Alkaline (LR6)/Manganese (R6) batter-
ies, or rechargeable nickel-metal hydride batteries (rechargeable Ni-MH batter-
ies). The Alkaline batteries or rechargeable Ni-MH batteries are recommended
for this instrument, since other types may result in poorer battery performance.
WARNING
• When the batteries run out, or if the instrument is not to be used for a long time, remove
the batteries from the instrument.
1
Make sure that the power of the instrument is off.
2
Open the battery compartment cover located on the instrument's bottom
panel.
3
Insert the six new batteries, being
careful to follow the polarity mark-
ings on the inside of the compart-
ment.
4
Replace the compartment cover,
making sure that it locks firmly in
place.