Sony HCD-ZX66i Service Manual page 26

HCD-ZX66i/ZX99i
[CD AGING MODE]
• This mode can be used for operation check of CD section.
If an error occurs, the aging operation would stops and the sta-
tus is displayed.
If there were no error occurs, the aging operation would con-
tinue repeatedly.
Procedure:
1. Press [? / 1] button to turn the set ON.
2. Select CD function.
3. Load 5 discs on the disc tray.
4. Press [PLAY MODE] button repeatedly to select the "ALL
DISCS" mode, and press the [REPEAT] button on the remote
repeatedly to select repeat mode off.
5. Press [M] (iPod) button, [TUNING MODE] button and
[DISC 4] button simultaneously.
6. Aging operation is started.
7. To release from this mode, press [? / 1] button or disconnect
the power cord to turn the power OFF.
Aging mode sequence:
START
(from Disc 1)
Disc Chucking
TOC Reading
Play first track for 2
seconds
Play last track for 2
seconds
EX-CHANGE open/
close
Open the disc tray
Disc skip
Close the disc tray
Change the next disc
26
[CD ERROR CODE MODE]
1. Display the CD error code when an error occurred
Procedure:
1. Press [M] (iPod) button, [TUNING MODE] button and
[DISC SKIP] button simultaneously to enter the error code
display mode.
2. The fl uorescent indicator tube displays the number of total er-
ror.
3. Each time CD buttons is pressed, display change as below.
Display of
Total Error
FF button
Display of
AMS (–)
Mechanical
button
FF button
Display of
AMS (–)
No Disc
button
4. To clear the error record, operate the cold reset. (Refer to the
"MC COLD RESET")
5. To release from this mode, press the [? / 1] button or discon-
nect the power plug to turn the power OFF.
2. Display of total error
Em**Ed**
Em**: The number of times for CDM (mechanical) errors.
Ed**: The number of times for BD error (after chucking the
disc).
• Display of CDM (mechanical) errors. It is show with "M" and
11 digit number.
M*$$%%&&##00
M*: The number of history error for mechanical ("0" is latest
one)
(Press [>] (CD) button to display next error)
$$: Not used
%%: Loading related error (Second fi gure is not used)
D: Stop by the problem other than mechanical problem
while closing.
E: Stop by the problem other than mechanical problem
while opening.
C: Stop by the problem other than mechanical problem
while chucking up.
F: Stop by the problem other than mechanical problem
while chucking down.
FR button
AMS (+)
button
Errors
FR button
AMS (+)
button
Errors