Specifications - Sony HS-Series SDM-HS73 Quick Setup Manual

Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the 1 (power) indicator will either light up in green or
flash orange. If the function tells you the monitor may have a
potential failure, consult your authorized Sony dealer.
If the picture disappears from the screen and the
1 (power) indicator is green
1
Turn off the 1 (power) switch and disconnect the
video signal cables from the monitor.
2
Turn the monitor on by pressing the 1 (power)
switch.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
If the picture disappears from the screen and the
1 (power) indicator is flashing orange
Press the 1 (power) switch twice to turn the monitor off
and then on.
If the 1 (power) indicator lights up green, the monitor is working
properly.
If the 1 (power) indicator is still flashing, there is a potential
monitor failure.
Displaying this monitor's
information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
MENU
Example
INFORMATION
MODEL : SDM-HS53
SER NO : 1234567
MANUFACTURED : 2003-52
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-HS53 or SDM-HS73 or SDM-HS93
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board

Specifications

SDM-HS53
LCD panel
Input signal format
Resolution
Input signal levels
Power requirements
Power consumption Max. 25 W
Operating temperature 5 – 35°C
Dimensions (width/height/depth)
Mass
Plug & Play
Included items
SDM-HS73/HS93
LCD panel
Input signal format
Resolution
Input signal levels
Power requirements
Power consumption
Model name
Operating temperature 5 – 35°C
Dimensions (width/height/depth)
Serial number
Week and year
of manufacture
Mass
Plug & Play
Included items
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
Panel type: a-Si TFT Active Matrix
Picture size: 15.0 inch
RGB operating frequency*
Horizontal: 28 – 61 kHz
Vertical: 48 – 75 Hz
Horizontal: Max.1024 dots
Vertical: Max.768 lines
RGB video signal
0.7 Vp-p, 75 , positive
SYNC signal
TTL level, 2.2 k ,
positive or negative
(Separate horizontal and vertical)
100 – 240 V, 50 – 60 Hz,
Max. 0.6 A
Display (upright):
Approx. 390 342
3 1
(15 / 13 /
8 2
Approx. 3.8 kg (8 lb. 6 oz.)
DDC2B
See "Setup."
Panel type: a-Si TFT Active Matrix
Picture size: 17.0 inch (SDM-HS73)
Picture size: 19.0 inch (SDM-HS93)
RGB operating frequency*
Horizontal: 28 – 80 kHz
Vertical: 48 – 75 Hz
Horizontal: Max.1280 dots
Vertical: Max.1024 lines
RGB video signal
0.7 Vp-p, 75 , positive
SYNC signal
TTL level, 2.2 k ,
positive or negative
(Separate horizontal and vertical)
100 – 240 V, 50 – 60 Hz, Max. 1.0 A
Max. 45 W (SDM-HS73)
Max. 50 W (SDM-HS93)
Display (upright):
Approx. 441 404
3 5
(17 / 16 8
8
Approx. 480 440
3
(19 17 / 10
8
Approx. 5.9 kg (13 lb. 0 oz.) (SDM-HS73)
Approx. 6.7 kg (14 lb. 12 oz.) (SDM-HS93)
DDC2B
See "Setup."
horizontal time or 0.8 µs, whichever is larger.
185 mm
3
7 / inches)
8
216 mm
/ inches) (SDM-HS73)
8
260 mm
1
/ inches) (SDM-HS93)
4
5
(US)
US