Self-Diagnosis Function; Specifications - Sony Trinitron HMD-A100 Operating Instructions Manual

Trinitron color computer display
Hide thumbs Also See for Trinitron HMD-A100:
Table of Contents

Advertisement

Available languages

Available languages

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer, the screen will go
blank and the 1 (power) indicator will either light up green or
flash orange. If the 1 (power) indicator is lit in orange, the
computer is in power saving mode. Try pressing any key on the
keyboard.
MENU
1 (power) indicator
If the 1 (power) indicator is green
1
Disconnect the video input cable, or turn off the
connected computer.
Press the 1 (power) button to turn the monitor off
2
and on.
Move the control button , for 2 seconds before the
3
monitor enters power saving mode.
M E N U
If all three color bars appear (red, green, blue), the monitor is
working properly. Reconnect the video input cables and check the
condition of your computer.
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor’s condition.
If the 1 (power) indicator is flashing orange
Press the 1 (power) button to turn the monitor off and
on.
If the 1 (power) indicator lights up green, the monitor is working
properly.
If the 1 (power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the 1 (power) indicator and inform your authorized
Sony dealer of the monitor’s condition. Be sure to note the model
name and serial number of your monitor. Also note the make and
model of your computer and video board.

Specifications

HMD-A100
CRT
0.25 mm aperture grille pitch
15 inches measured diagonally
90-degree deflection
Approx. 285 × 215 mm (w/h)
Viewable image size
× 8
1
1
(11
/
/
inches)
4
2
14.0" viewing image
Resolution
Horizontal: Max. 1280 dots
Vertical: Max. 1024 lines
Approx. 270 × 202 mm (w/h)
Standard image area
× 8 inches)
3
(10
/
4
Deflection frequency*
Horizontal: 30 to 70 kHz
Vertical: 48 to 120 Hz
AC input voltage/current 100 to 120 V, 50 – 60 Hz, 1.9 A
Power consumption
Max. 95 W (with no USB devices
connected)
Approx. 373 × 372 × 425 mm (w/h/d)
Dimensions
× 14
× 16
3
3
3
(14
/
/
/
inches)
4
4
4
Mass
Approx. 15 kg (33 lb 11 oz)
Plug and Play
DDC1/DDC2B
Supplied accessories
See page 6
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 µsec.
• Horizontal blanking width should be more than 3.6 µsec.
• Vertical blanking width should be more than 500 µsec.
HMD-A200
CRT
0.25 mm aperture grille pitch
17 inches measured diagonally
90-degree deflection
Approx. 327 × 243 mm (w/h)
Viewable image size
× 9
7
5
(12
/
/
inches)
8
8
16.0" viewing image
Resolution
Horizontal: Max. 1280 dots
Vertical: Max. 1024 lines
Approx. 312 × 234 mm (w/h)
Standard image area
× 9
3
1
(12
/
/
inches)
8
4
Deflection frequency*
Horizontal: 30 to 70 kHz
Vertical: 48 to 120 Hz
AC input voltage/current 100 to 120 V, 50 – 60 Hz, 2.0 A
Power consumption
Max. 115 W (with no USB devices
connected)
Approx. 460 × 378 × 441 mm (w/h/d)
Dimensions
× 15 × 17
1
3
(18
/
/
inches)
8
8
Mass
Approx. 19 kg (41 lb 14 oz)
Plug and Play
DDC1/DDC2B
Supplied accessories
See page 6
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 µsec.
• Horizontal blanking width should be more than 3.0 µsec.
• Vertical blanking width should be more than 500 µsec.
Design and specifications are subject to change without notice.
Page 16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hmd-a100/lTrinitron hmd-a200

Table of Contents