DISASSEMBLY -- ENGINE REMOVED
A. Dust Cover
Holding the universal joint coupling with the holder
(special tool), unscrew the coupling bolts (4).
the universal joint into the swing arm.
A. Universal Joint
C. Dust Cover
1. Front Upper Mounting Bolt
Front Lower Mounting Bolt
3. Rear Lower Mounting Bolt
4. Rear Upper Mounting Bolt
5. Rear Upper Left Mounting Bracket Bolts
6. Front Upper Right Mounting Bracket Bolts
Rear Lower Right Mounting Bracket Bolt
8. Rear Upper Right Mounting Bracket Bolts
eTo lift the engine, use a strap.
sure that the following cables and leads are free,
and properly positioned on the engine and frame so
that they will not get damaged during engine removal
starter lead, pick-up coil leads, water temperature
sender lead, neutral switch lead, alternator leads, bat-
tery negative ground lead, tachometer cable, clutch
cable and throttle cables.