Download  Print this page

Kawasaki KZ1300-A1 Quick Reference Manual Page 90

Hide thumbs

Advertisement

DISASSEMBLY--ENGINE INSTALLED
Oil Filter
1.
Oil Filter Housing
6.
Mounting Bolt
2. Filter Element
7. 0 Ring
3. Oil Pan
8.
Spring
4.
Filter Cover
9.
0 Ring
5. Spring Seat
eApply a little
engine
oil to the 0 ring on the filter
mounting bolt, fit the filter cover on the bolt, and
install the spring and spring seat in
this.
sequence.
A. Spring
C.
Filter Grommet
B. Spring Seat
D. "0" Ring
eApply a little
engine
oil on the oil filter grommets,
and turn the filter mounting bolt to work the new
filter into place while holding the
filter
steady.
Be
careful
that the filter grommets do not slip out of
place.
elnstall the oil filter and tighten its bolt to 2.0 kg-m
(14.5 ft-Ibs) of torque.
elnstall the engine drain plug and tighten it to 2.3 kg-m
(16.5 ft-Ibs) of
torque.
eFili the engine with oil
,
check the level (Pg. 21), and
add more if
necessary.
RELIEF VALVE
Removal:
eUnscrew the engine drain plug, and drain the engine
oil
(Pg.
21).
eRemove the mufflers and exhaust pipes
(Pgs.
55 and
56).
eRemove the Allen bolt of the oil passage elbow.
A. Allen Bolt
B. Oil Passage Elbow
eUnscrew the oil pan Allen bolts (17), and remove the
oil pan and its gasket.
eRemove the relief valve.
A. Relief Valve
Installation Notes:
1. Apply a non-permanent locking agent to the relief
valve and torque it to 1.5 kg-m (1l.0 ft-Ibs)
.
2. Check that nozzles are in place on the mating surface
of lower crankcase and oil pan.
90

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: