Download  Print this page

Kawasaki KZ1300-A1 Quick Reference Manual Page 48

Hide thumbs

Advertisement

DISASSEMBLY--ENGINE INSTALLED
Rear Upper Housing Removal:
eRemove the
air
cleaner element
(Pg.
47).
ePull off
the
left side
cover.
eDisconnect
first
the negative (-) lead and the black/
white lead, and then the positive
(+)
lead and the
white/red
lead
from
the battery.
eRemove the
screws,
pull off the battery holding plate,
and remove the
battery
.
A. Battery Holding
Plate
eRemove the housing mounting screws and flat washers
(2 ea), and remove the housing.
A. Rear Upper Housing
Rear Lower Housing Removal:
eRemove
the front
upper
and the
rear upper housings
(See above).
eRemove
the carburetor
(Pg.
49).
eRemove
the reserve tank
with unscrewing
the
bolt.
eSlide
the breather
hose
clamp
out of position,
and
pull
off the
breather hose
from the
housing.
eRemove
the
solenoid
fuel
valve from the rear lower
housing
(Pg. 46).
eRemove
the
mounting bolts (2) and flat washers (2),
and remove the housing.
A. Rear Lower Housing
VACUUM SWITCH VALVE
(US
model)
Removal:
e
Remove the fuel tank
(Pg.
46).
e
Slide the hose clamps (4) out of place, and pull off
the vacuum hose from the vacuum switch valve. Re-
move the air hoses (3) from the air suction valve covers
and the air cleaner
housing.
A. Vacuum Switch Valve
C. Vacuum Hose
B. Hose Clamps
D. Air Hoses
Installation Notes:
1. Connect the paint-marked end of the air hoses to the
vacuum switch valve, and secure each hose end fitting
with a hose clamp.
Be
sure that all the hoses are
routed without being flattened or kinked.
A. Vacuum Switch Valve
C. Vacuum Hose
B.
Hose
Clamps
D.
Air Hoses
48

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: