Download  Print this page

Kawasaki KZ1300-A1 Quick Reference Manual Page 47

Hide thumbs

Advertisement

DISASSEMBLY--ENGINE INSTALLED
FUEL LEVEL SENDER
Removal:
eTurn the fuel
tap
lever
to
the
"OFF"
position.
eRemove
the
drain plug 'and gasket at the bottom of
the fuel tap.
eHolding a container under the fuel tap, turn
the
tap
lever to the
"RES"
position to drain the tank.
eRemove the fuel
tank
(Pg. 46), and completely drain
the fuel inside the tank.
eRemove the fuel level sender cover prying the outside
of cover with a driver.
eRemove the fuel level sender
and
its gasket by removing
the bolts (6)
.
Installation Note:
eMatch the bolt holes so that the float is positioned
directly forward of the sender body. Float movement
will be hindered in any other position.
A. Float
AIR CLEANER ELEMENT
Removal:
eUnlock the seat and swing it open.
eRemove the tool kit, and remove its
retaining
bolts (2)
with the washers.
A. Tool Tray
B. Retaining Bolts
eTake
off the tray, and pull out the air cleaner
element.
A. Air Cleaner Element
AIR CLEANER HOUSING
Front Upper Housing Removal:
eRemove the fuel tank (Pg. 46).
ePull off both covers from the air cleaner housing.
eSlide up the clamp, and pull off the air hose to the
vacuum switch valve from the housing.
eRemove the mounting screws (2) with the lockwashers
and flat washers.
ePut the main harness right side and the reserve tank
hose left side. Pull the housing off to the rear, and
slide it sideways.
A. Front Upper Houling
B. Air
HOM
(US model)
47

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: