Download  Print this page

Front Fork; Rear Shock Absorber - Kawasaki KZ1300-A1 Quick Reference Manual

Hide thumbs

Advertisement

SUPPLEMENT --1981 MODEL
Table N18
Voltage Applied to
Oil Level Warning Light Switch
Meter Range:
25V DC
Lead Location: Female, warning light switch connector
with male connector disconnedted.
Connections:
Meter (+)"""* Yellow/Red or Blue/White
Meter (-)"""* Black/Yellow
Reading:
Vattery Voltage
Table N19
Oil Level Sensor Inspection
Meter Range:
x 1
n
Lead Location: Female, level sensor lead with male
lead disconnected.
Connections:
Meter (+) """* Yellow
Meter (-)"""* Ground
Reading:
Under 0.5
n
(when the oil level correct.)
Infinity
(After draining out the oil
completely.)
Table N20
Oil Level Sensor Inspection
Meter Range
Float Position
Reading
Highest
Under 0.5
n
xl
n
Lowest
Infinity
8. Oil Level Warning Light Switch Inspection
eRemove the oil level warning light switch near the main
switch.
ePrepare a 12V battery, test light made from about
12V3W bulb in a socket, and leads.
eConnect the battery and test light as shown in Fig. N58
to simulate the oil pressure/level warning system.
eConnect the connector
®,
and then connect the con·
nector
®.
eAt this time, check to see that the test light comes on
and off according to the condition of the connector @
(i.e. on and off).
eDisconnect the connectors
® , ®,
and @, and then
connect the connector
® .
eAt this time, check to see that the test light comes on
and it is on continuously with no relation to the condi-
tion of the connector @ until the connector
®
is dis-
conneCted.
elf above two tests are normal, the oil level warning light
switch is good.
FRONT FORK
The front fork for 1981 model has the connecting
hose assembly to equalize the air pressure between the
left and right fork legs. Change the fork oil refering to
p.p. 226 and 313.
REAR SHOCK ABOSRBER
Since the rear shock absorbers are sealed units which
can not be disassembled, only external checks of rear
shock absorbers are necessary. Replace the dust boot or
connecting hose if it is cracked, torn,
or otherwise
damaged.
Rear Shock Absorber
3r---------------------~jb
4r---------------------~~
6~--------------f_--~r_--~1
7r-----------------~~
8r---------------~1
9~----------------~
JOIr-----------------~~
JJr-----------------~!:r_l
1. Air Valve
2. Connecting Hose Assy
3. Rubber Bushing
4. Collar
5. Damper Adjuster
6. Rubber Cover
7. Spring
8. Rear Shock Absorber Unit
9. Oil Seal
10. Spring
11. Dust Boot
(j])f------
12. Rubber Bushing
13. Collar
@r-------
321

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: