Download  Print this page

Kawasaki KZ1300-A1 Quick Reference Manual Page 31

Hide thumbs

Advertisement

ADJUSTM ENT --CHASSIS
A.
Adjusting Screw
Vertical Adjustment
eRemove the two screws from the lower side of the
headlight housing, and drop out the headlight unit.
A. Screw
eLoosen the headlight housing stay bolt underneath the
headlight.
A.
Bolt
B. Housing Mounting Nuts
eLoosen the headlight housing mounting nuts, and ad·
just the headlight vertically.
NOTE:
On
high beam, the brightest point should be
slightly below horizontal. Adjust the headlight to the
proper angle according to the regulation that applies
to
its operation.
Adjust with normal operational weight
loaded on the motorcycle.
Vertical Adjustment
eTighten the headlight housing mounting nuts, and reo
mount the headlight unit.
eTighten the headlight housing stay bolt.
FINAL GEAR CASE OIL
In order for the pinion and ring gears
to
function
properly, maintain the final gear case oil at the proper
level, and change the oil in accordance with the Periodic
Maintenance Chart (Pg. 10).
I
WARNING
I
Moto.rev ele operation ~h ins~fficient,
.,. _ _ _ ...
detenorated, or cont.mnated oil causes
accelerated wnr and may result in seizure of the pinion
and ring gaan.
Seizure can lock the rear whnl and
skid the rear tire, with consequent loss of control.
31

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: