Download  Print this page

Pickup Assembly; Automatic Timing Advancer Housing; Automatic Timing Advancer; Starter Motor Clutch - Kawasaki KZ1300-A1 Quick Reference Manual

Hide thumbs

Advertisement

SUPPLEMENT --1981 MODEL
ENGINE
Part
Q'ty
Metric English
(kg-m)
(ft-Ibs)
Starter Motor Clutch Mounting Bolt
cp
12 P1.25
Baffle Plate
Mounting
Screw
rp6
Pl.0
PICKUP ASSEMBLY
Removal:
1
15.0
2
-
-Set
the motorcycle up on its center stand and put an
oil pan beneath the left engine cover.
-Remove
the right side
cover.
-
Disconnect the 6-pin conector that
joins the
pickup
coil
leads to
the
IC igniter and
free
the leads
from
the
motorcycle.
A. 6-pin Connector
B. IC Igniter
-Unscrew
the left
engine
cover Allen
bolts (10) and
remove
the cover.
-
Unscrew the
pickup mounting
screws (3)
and
remove
the
pickup
assembly.
AUTOMATIC TIMING ADVANCER HOUSING,
AUTOMATIC
TIMING
ADVANCER
This 1981 model employs
a
newly-developed
transis-
tor
ignition system, and the ignition timing is advanced
by
an
electric circuit in the IC
ighiter (electric advance
system).
So
there is
no mechanical automatic
timing
advancer.
STARTER MOTOR CLUTCH
Removal:
-Set
the motorcycle up on
its center
stand and put an
oil
pan beneath
the
left engine
cover.
-
Unscrew the
left engine cover Allen bolts
(10)
and
remove
the cover.
-
Unscrew
the alternator cover Allen bolts (8) and
remove the cover.
NOTE:
The left engine and alternator covers need not
be
removed
completely, so the leads may be left
con-
nected
.
-Holding
the alternator rotor with the flywheel holder
(special
tool)
,
remove
the starter motor clutch mount-
ing bolt and washer.
108
-
Remarks See Pg.
-
309
-
310
NOTE:
The bolt
is
a left hand thread and must be
turned clockwise to loosen.
A. Flywheel Holder (57001-308)
B. Alternator Rotor
A. Starter Motor Clutch
B. Turn Clockwise to Loosen
-To
pull out the starter motor clutch assembly, insert
the
rotor puller adapter (special tool) in the hole of the
crankshaft.
A. Rotor Puller Adapter (57001-1082)
308

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: