OISASSEMBL Y -- CHASSIS
eRemove the headlight housing mounting bolts (3) and
remove the headlight
Each bolt has a flat
washer and nut.
A. Headlight Housing
C. Plastic Cover
B. Mounting Bolts
eRemove the plastic cover, and remove the two bolts
which mount the horns and hose joint.
eRemove the fork leg upper clamp bolts on both sides,
and remove the cable guide and the hose clamp.
eRemove the clamp bolts (2), and take off the master
Do not disconnect the brake hoses.
A. Master Cylinder
B. Hose Joint
eRemove the handlebar
eLoosen the stem head clamp bolt, and then remove the
stem head bolt, lockwasher, and flat washer.
eTap lightly on the bottom of the stem head with a
mallet, and then remove the steering stem head to-
gether with the meter assembly.
meter is left upside down or sideways for any length
of time, it will malfunction.
A. Stem Head
B. Meter Assembly
eRemove the fork covers with the turn
fork cover has a ring cap, stem base
ring, and rubber damper at the bottom.
A. Rubber Damper
C. Base Cover
B. Damper Ring
eLoosen the front fork lower clamp bolts (4) on both
sides, and pull out both fork legs and front fender at
a time with a twisting motion.
ePush up on the stem base, and remove the steering
stem locknuts with the stem nut wrench (special tool)
then remove the steering stem.
A. Stem Locknuts
B. Stem Nut Wrench (57001 ·134)
eRemove the steering stem cap and upper tapered roller