Download  Print this page

Kawasaki KZ1300-A1 Quick Reference Manual Page 144

Hide thumbs

Advertisement

DISASSEMBLY -- CHASSIS
Installation Notes:
1.
First, fit the positioning plate and the inner ring
in
the upper half of the switch
housing.
Turn
the
posi-
tioning plate so that the notch
in
the plate meshes
with
the knob
in the housing. The switch electrical
points on the inner ring and the holes in
the
position-
ing plate must be in the upper housing half.
A. Positioning Plate
D. Holes
B. Upper Half
E.
Inner Ring
C. Notch
2.
The lower half of the switch housing has
a
small pro-
jection which fits into a hole in the
handlebar.
A. Projection
HANDLEBAR
Removal:
B. Hole
eTake off the rear view mirrors.
eRemove the
fuel
tank (Pg.
46)
or cover it with a
thick
A. Starter Lockout Switch
B. Hole
ePuil the dust
cover
out of
the
way
at
the lower
end
of the clutch
cable,
loosen
the
locknut, and
turn in
the clutch cable
adjuster
to give the
clutch cable
plenty
of play.
A. Locknut
B.
Adjuster
eLoosen the knurled locknut on
the clutch
lever,
and
turn in the adjuster.
Line up the
slots
in
the clutch
lever, locknut,
and
adjuster,
and free the
inner
cable
from the
lever.
cloth to avoid damaging the painted
surface.
A. Clutch Cable
C. Knurled Locknut
eTo remove the starter lockout switch, depress the lock
B. Adjuster
tab
in the hole, and pull out the switch.
144

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: