Download  Print this page

Kawasaki KZ1300-A1 Quick Reference Manual Page 143

Hide thumbs

Advertisement

OISASSEMBL Y -- CHASSIS
A.
Tachometer
Mounting Screws
B.
Speedometer Mounting Screws
C. Fuel Gauge Mounting Nuts
D. Water Temperature Gauge Mounting Nuts
E. Distance Sensor
eTo remove
the
fuel gauge
or water
temperature
gauge,
unscrew
the
nuts,
lockwashers, and flat washers (2 ea),
and remove the gauge.
Assembly
Note:
elnstall
the meters, gauges,
indicators,
meter lights, and
meter
leads
as shown
in
Fig. G69.
IGNITION SWITCH, STEERING
LOCK ASSEMBLY
Removal:
eRemove
the headlight unit
(Pg.
139).
eDisconnect the ignition switch
6-pin
connector in
the
headlight housing.
eRemove the
headlight
housing stay
bolt
and
nut under
the
housing.
eRemove the housing
mounting bolts,
nuts, flat
washers,
and lockwashers (2 ea), and remove the
headlight hous-
ing.
eRemove the
Allen bolts and lockwashers
(2 ea), and
remove the
ignition
switch
and
steering
lock
assembly.
A.
Ignition
Switch and Steering Lock Assembly
B. Allen Bolt
Installation Note:
eAd
just
the headlight (Pg. 30), after installation.
LEFT SWITCH HOUSING
Removal:
eRemove
the fuel tank
(Pg.
46).
eRemove
the straps which
hold
the switch housing
harnesses
to
the handlebar and frame top tube.
eDisconnect
the connectors (3) from the switch housing
at the frame
top tube.
eUnscrew
the mounting screws
of
the outer ring for
the dimmer switch, and
unscrew
the switch housing
screws.
A. Housing Screws
eLoosen the
clamp bolt of the clutch lever holder, and
slide
the
clutch lever holder and switch
housing
to slip
the outer
ring
off the inner
ring.
A.
Outer Ring
C.
Switch Housing
B.
Inner Ring
eRemove the switch
housing
from the handlebar.
143

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: