Download  Print this page

Kawasaki KZ1300-A1 Quick Reference Manual Page 140

Hide thumbs

Advertisement

DISASSEMBLY -- CHASSIS
A. Bulb Stop
~ :~:~ ::;:~i~~et~~as~u::~Oa~'!~~h b~~~~
hands.
Always use a clean cloth. Oil contamination
from hands or dirty rags can reduce bulb life or even
cause the bulb to explode.
eRemove the pivot screws
CD,
nuts
CD
with rubber
dampers
CD
(2 eal, and the beam horizontal adjusting
screwQt. The nut@, spring
seat@,
and spring@will
come off with the adjusting screw.
eSeparate the outer
rim
CD
from the inner
rim
CD.
eRemove the screws
CD
(41, and separate the semi-sealed
beam unit from the inner rim and mounting rim
.
Headlight Unit
1. Pivot Screw
10. Bu Ib Stop
2. Outer Rim
11. Rubber Boot
3.
Rubber Damper
12. Adjusting Screw
4.
Screw
13. Screw
5. Nut
14. Lockwasher
6. Inner Rim
15. Collar
7. Semi-sealed
16. Spring
beam unit
17. Spring Seat
8. Mounting Rim
18. Nut
9. Headlight Bulb
Installation Notes:
1.
The spring seat on the adjusting screw goes between
the spring and the bracket.
2. The top of the semi-sealed beam unit is marked
"TOP".
A. Top Mark
3. Adjust the headlight after installation (Pg.30).
INDICATOR LIGHTS (Neutral, High Beam,
Oil, Headlight)
Bulb Replacement:
eUnscrew the screws (2), and remove the indicator light
cover.
A. Screws
B. Cover
eTake out the damper rubber from the indicator light
body, and remove the
bulbs.
elnstall new bulb (rated 12V 3.4W)
.
el nstall the indicator I
ight
cover.
140

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: