OISASSEMBL Y -- CHASSIS
eLoosen the knurled locknut on the clutch lever, line
up the slots in the clutch lever holder, locknut, and
adjuster, and then free the cable from the lever.
A. Outer Cable
ePull the cable downward and free of the
Before installing the clutch cable, lubricate it (Pg.
2. Adjust the clutch (See Pg. 20)
eRemove the fuel tank (Pg.46).
eGive the throttle cables plenty of play by loosening
the upper (handlebar) locknuts and adjusting nuts.
~ ::~m~~~ :r::':;:~ th;i:::~:~::::
cable play may cause throttle cable damage.
t hrottle cable adjuster mounting nuts (4)
on t he
Remove the cable adjusters from
the cable bracket
of the in ner cables out of the pulley
A. Decelerator Cable Adjuster
Accelerator Cable Adjuster
eLoosen both cable elbow
and pull the cables out
between the right front fork leg and the head pipe.
eRemove the right switch housing screws
A. Switch Housing
Switch Housing Screws
B. Elbow Nuts
eSlip both throttle cable tips from their catches in the
eUnscrew the accelerator throttle cable elbow, and pull
the cable out of the right switch housing. Then do the
same with the decelerator throttle cable elbow to free
the throttle cables from the motorcycle.
eBefore installing the throttle