Download  Print this page

Kawasaki KZ1300-A1 Quick Reference Manual Page 110

Hide thumbs

Advertisement

DISASSEMBLY -- ENGINE REMOVED
Secondary Shaft
7. Cam Follower
1.
Secondary Shaft
2. Circlip
3.
Washer
5. Camshaft Chain and
Timing Chain Sprockets
6.
Primary Chain
8.
Spring
9. Secondary Chain Drive
Sprocket
4.
Oil Pump Drive Gear
Driven Sprocket
10.
Retainers
Secondary Shaft Assembly Notes:
1.
Be sure to fit the damper cam into the concave recess.
A. Cam
B. Concave Recess
C. Square Recess
2. Replace any circlips that were removed with new
ones. Install the circiip so that its opening coincides
with one of the splined grooves in the secondary
shaft.
Circlip Installation
TIMING CHAIN GUIDE
Removal:
eRemove the cylinder block (Pg. 73).
eRemove the engine (Pg. 96).
eSplit the
crankcase
(Pg. 98).
eRemove the secondary shaft,
camshaft
chain, timing
chain, and secondary chain (Pg 1 08).
eRemove the rubber plug, and pull out the
timing
chain
guide from the upper crankcase
half.
A. Rubber Plug
B. Timing Chain Guide
CRANKSHAFT, PRIMARY CHAIN
Removal:
eRemove the cylinder block (Pg. 73) to avoid overstress
on the four cylinder bolts.
eRemove the alternator rotor (Pg. 86).
eRemove the torsion damper (Pg. 79).
eRemove the engine (Pg. 96).
eSplit
the cran kcase (Pg. 98).
110

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: