Download  Print this page

Kawasaki KZ1300-A1 Quick Reference Manual Page 105

Hide thumbs

Advertisement

DISASSEMBLY -- ENGINE REMOVED
elnstall the 5th gear. The dog recesses face toward the
3rd gear.
elnstall the thick splined washer, and turn it so that
the teeth coincide with the ridges of the spline.
elnstall the splined washer with the locking tabs. The
locking tabs must go into the thick splined washer.
A. Locking Tabs
B. Thick Splined Washer
elnstall the 2nd gear with its recess toward the 5th gear.
elnstall the copper washer, steel washer, and needle
bearing in this order.
elnstall the circlip and needle bearing outer race.
Driven Shaft
1. Circlip
8. Shim(s)
2. Splined Washer
9. Needle Bearing
eOn the ball bearing side of the shaft, install the collar
and the secondary chain driven sprocket.
Driven Shaft
Disassembly:
eRemove the needle thrust bearing
CD
and its shim(s)
®.
ePull the inner shaft
CD
off the outer shaft
@,
and
remove the needle bearing
@
from the outer shaft.
A.
Inner Shaft
B. Outer Shaft
Inner Shaft:
eUnscrew the nut
CD
while holding the bevel gear
®
with the holder (special tool).
14. Circlip
21. Ball Bearing
15. 5th Gear
22. Set Ring
3. 3rd Gear
10. Needle Bearing Inner
16. Outer Shaft
23. Shim(s)
4. Washer
Race
17.
4th Gear
24. Bevel Gear
5. Inner Shaft
11.
2nd Gear
18. Washer
25. Lockwasher
6. Nut
12. Bushing
19. Needle Bearing
7.
Needle Thrust Bearing
13.
Splined Washer
20. 1st Gear
105

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: