Download  Print this page

Kawasaki KZ1300-A1 Quick Reference Manual Page 104

Hide thumbs

Advertisement

DISASSEMBLY -- ENGINE REMOVED
A. Spring Compressor (57001·1042)
eUsing
a suitable
driver,
drive the clutch
housing
on
until the
hub
end is even with the end of the sprocket.
Secondary Chain Driven Sprocket
1. Seconaary Cham
Driven Sprocket
2. Ball Bearings
3. Clutch
housing
4. Needle bearing
ePress the drive shaft ball bearing using the transmission
circlip driver (special tool). The set ring groove must
be toward the 1 st gear side.
A. Transmission Circlip Driver (57001·382)
B. Set Ring Groove
C. 1st Gear
elnstall
the 4th
gear.
The gear dogs face away from the
1st gear.
elnstall
the thin splined washer, and install a new circlip
in the
groove.
elnstall
the 3rd gear.
Align its oil hole with the oil
holes in the shaft. The groove for the shift fork faces
away from the 4th gear.
A. Align oil holes.
elnstall
the
circlip,
thin splined washer, and gear bushing
in this
sequence.
Align the oil hole in the bushing
with the oil hole in the shaft.
A. Align oil holes.
104

Advertisement

Table of Contents

This manual is also suitable for:

Kz1300-a2

Comments to this Manuals

Symbols: 0
Latest comments: