Final Check - Beko BCT90GX User Manual

3 Installation
3.6.1 Rear view (connection
holes)
Place the burner plates, burner plate caps and
grills back to their seating after installation.
WARNING: Making connections
A
to different holes is not a good prac-
tice in terms of safety since it can
damage the gas and electrical sys-
tem.
WARNING: There are gas and
electric components on cooktops.
Therefore stove, only the connec-
A
tion hole shown in this manual
should only be fixed to the unit as
shown in the manual using the sup-
plied fasteners and screws supplied.
Otherwise, it is dangerous to the life
and property safety.
Where the data plate is obscured by cabinetry
when the cooker is in the installed position, place
the supplied duplicate data plate to a suitable ad-
jacent surface or within the instruction manual for
future reference.
Built-In Hob / User Manual

3.7 Final check

1. Open gas supply.
2. Check gas installations for secure fitting and
tightness.
3. Ignite burners and check appearance of the
flame.
4. Gas leakage, setting the test point, setting the
turndown, ensuring complete ignition of all
burners.
5. For other minor adjustments or if the appliance
does not perform correctly contact: Beko A and
NZ Pty Ltd 1300 282 356
Flame must be blue and have a reg-
C
ular shape. If the flame is yellowish,
check if the burner cap is seated se-
curely or clean the burner.
19 / EN