ActionTec Broadband Router RI408 User Manual page 44

Actiontec electronics broadband router user manual
Hide thumbs Also See for Broadband Router RI408:
Table of Contents

Advertisement

Network Select the type of connection being configured from the drop-down list
(Broadband Connection, Network (Home/Office), or DMZ).
Connection Type Displays the type of connection. Since this is
"
o
" is displayed.
PPP
E
MTU
Maximum Transmission Unit) specifies the largest packet size
MTU (
permitted for Internet transmission. "Automatic, sets the
choices include "Automatic," which sets the
the
, and "Manual," which allows the
ISP
Underlying Connection Specify the underlying connection above which the proto-
col initiates from the drop-down list, which displays all possible underlying devices.
PPP Configuration
Point-to-Point Protocol (
packets between the user and the
Service Name Specify the networking peer's service name, if provided by the
in this text box.
On-Demand To use
only when packets are actually sent over the Internet, click in this check box. This
option should be active on a limited basis
Idle Time Before Hanging Up Enter the amount of idle time, in minutes, before the
session automatically ends .
PPP
Time Between Reconnect Attempts In this text box, specify the duration between
reconnect attempts, as provided by the
PPP
PPP Authentication
Point-to-Point Protocol (
tocols: Password Authentication Protocol (
Authentication Protocol (
Select the authentication protocols the Router may use when negotiating with a
server in this section. Select all the protocols if no information is available
PPTP
about the server's authentication methods. Note that encryption is performed
only if Microsoft
CHAP
M
Warning: The
changed unless instructed to do so by Verizon.
Chapter 4 Using Network Connections
) is the most popular method for transporting
PPP
ISP
on demand to initiate the point-to-point protocol session
PPP
) currently supports four authentication pro-
PPP
), and Microsoft CHAP versions 1 and 2.
CHAP
, Microsoft
CHAP
Authentication settings should not be
PPP
according to the connection to
MTU
to be set manually.
MTU
.
.
ISP
), Challenge Handshake
PAP
version 2, or both are selected.
41
o
connection,
PPP
E
at 1492. Other
MTU
,
ISP

Advertisement

Table of Contents
loading

Table of Contents