Functions Of On-Screen Menus - Sony TRINITRON BVM-20M4DE Operation Manual

Using On-Screen Menus
To close the menu (to return to the regular
screen)
Each time you press the MENU/EXIT (1) button, the
on-screen menu returns to the one previously
displayed. Press the MENU/EXIT (1) button
repeatedly until the regular screen appears.
To select the language
For the first time when the monitor is turned on, the
LANGUAGE menu (@£) will appear on the screen.
So, select the language you want to use.
1
Move the cursor (z) to the desired language by
pressing the ./– or >/+ (4, 3) button.
2
Press the MENU/EXIT (1) button.
Note
Unless you press the MENU/EXIT (1) button in the
procedure above, the LANGUAGE menu will always
appear whenever you turn on the monitor.

Functions of On-Screen Menus

[ ] indicates the factory setting.
1Main menu
Select another menu and press ENTER/SELECT to go
to the menu.
2a STATUS 1 menu
Shows the current settings.
2b STATUS 2 menu
Shows what optional kit is installed in the monitor.
3CHROMA SET UP menu
Select ON on this menu to activate "chroma" and
"phase" (NTSC signal only) adjustments done on the
AUTO ADJUST screen (7).
10(E)
MENU
[OFF]
4COLOR TEMP/BAL menu
Select the color temperature from among D65, D93
and USER. USER is set to D65 as the factory setting.
You can adjust or change the color temperature in
USER mode (a measuring instrument is required).
5a SDI AUDIO menu (when the BKM-101C is
installed for BVM-20M4E/14M4E)
You can select no sound (NONE) or analog sound
through the AUDIO IN jack in the analog RGB
connectors (ANALOG (RGB)).
No digital sound signals selected.
5b SDI AUDIO menu (when the BKM-102 is
installed for BVM-20M4DE/20M4E/14M4DE/
14M4E)
Select the digital sound signals output channels or
analog sound through the AUDIO IN jack in the
analog RGB connectors. When you select
"CH1+CH2", you can monitor the mixed sound from
channels 1 and 2.
6a USER CONFIG 1 menu
Select an item to adjust on the menus and screens (!™
through !ª). To go to the USER CONFIG 2 menu,
select NEXT PAGE.
6b USER CONFIG 2 menu
Select an item to adjust on the menus and screens (@º
through @∞). To go to the USER CONFIG 1 menu
select PREVIOUS PAGE.
7AUTO ADJUST screen
Select the color bar signal (full, SMPTE, EIA) and
press ENTER/SELECT to start automatic "chroma"
and "phase" (NTSC signal only) adjustments.
To activate these adjustments, select ON on the
CHROMA SET UP menu (3).
8ADJUST GAIN screen
Adjust GAIN in USER mode.
9ADJUST BIAS screen
Adjust BIAS in USER mode.
!ºCOLOR TEMP RANGE menu
Select the color temperature range in USER mode.
[D65]
[NONE]
[CH1+CH2]
[5000K-10000K]