Buffer overflow
You cannot record because the drop sensor
senses a drop of the camcorder repeatedly.
If you are at risk of dropping the camcorder
constantly, set [DROP SENSOR] to [OFF],
and you may be able to record the image again
(p. 79).
Recovering data.
Your camcorder tries to recover data
automatically if the data writing was not
performed properly.
Cannot recover data.
Writing data onto the media of the camcorder
has failed. Attempts were made to recover the
data, but they were unsuccessful.
Reinsert the memory card.
Reinsert the memory card a few times. If even
then the indicator flashes, the memory card
could be damaged. Try with another memory
card.
This memory card is not formatted
correctly.
Format the memory card (p. 74). Note that if
you format the memory card, all the recorded
movies and photos are deleted.
Still picture folder is full. Cannot record
still pictures.
You cannot create folders exceeding
999MSDCF. You cannot create or delete
created folders using your camcorder.
Format the memory card (p. 74), or delete
folders using your computer.
This memory card may not be able to
record or play movies.
Use a memory card recommended for your
camcorder (p. 18).