Sony XCD-V60, XCD-SX90, XCD-U100 Technical Manual page 18

For offset address 434h, the length of the UnitDependentInfo is 0Bh Quadlets.
CommandRegsBase is the base address of the camera control register.
F0000000h + 3c0000h × 4 = F0F00000h
The offset address of VendorNameLeaf is required to be
43Ch + 00000Ah × 4 = 464h
The offset address of ModelNameLeaf is required to be
440h + 00000Dh × 4 = 474h
Unit_sub_sw_version conforms to IIDC Standards, Version 1.31.
Vendor_unique_info 0 to Vendor_unique_info 3 are terms of information that the vendor of the camera can define.
The meanings in this camera are as follows:
Vendor_unique_info_0 is the firmware version.
Vendor_unique_info_1 is the hardware version.
Vendor_unique_info_2 is the link version.
Vendor_unique_info_3 is the serial number of the camera.
VendorNameLeaf
Vender Name Leaf
For offset address 464h, the length of the VendorNameLeaf is 3 Quadlets.
The subsequent 8 bytes are fixed at 00.
After that, the four characters for "SONY" are entered.
ModelNameLeaf
Model Name Leaf
For offset address 474h, the length of the ModelNameLeaf is 5 Quadlets.
The subsequent 8 bytes are fixed at 00.
After that, the model name is entered.
18
Offset 0-7
464h 0003
468h 00
46h 00
470ch 53
Offset 0-7
474h 0005
478h 00
47ch 00
480h 58
484h 56
488h 52
8-15 16-23 24-31
CRC
00 00
00 00
4F 4E
8-15 16-23 24-31
CRC
00 00
00 00
43 44
36 30
00 00
00
00
" "
59 SONY
00
00
" "
2D XCD-
" "
43 V60C
···
" "
00 R