Programming - Miele KM 7201 FR Operating And Installation Instructions

Programming

You can adapt the programming of the
hob to your personal needs. Several
settings can be altered in succession.
After accessing programming mode, 
(Programme) and  (Code) will appear in
the timer display, and the indicators for
2 cooking zones.
The programme is shown in the left
hand cooking zone display, and the
code in the right hand cooking zone
display. From programme stage 10 the
numbers appear alternately:  flashes
alternately with .
44
Changing the programming
Accessing programming mode
 With the hob switched off press both
the  and  sensor controls, until
 appears in the timer display and 2
cooking zone displays light up.
Setting the programme
 First touch the left-hand cooking
zone display and then touch the
relevant number on the numerical
keybank.
A dot will start to flash next to the
number.
 Whilst the dot is flashing, press the
relevant number(s) on the numerical
keybank for the programme number.
Setting the code
 First touch the right-hand cooking
zone display and then touch the
relevant number on the numerical
keybank.
A dot will start to flash next to the
number.
 Whilst the dot is flashing, press the
relevant number(s) on the numerical
keybank for the code.
Saving the settings
 Touch the  sensor control until the
indicators go out.