Displaying An Image As A Slide Show - Slide Show - Sony XDCAM EX Operating Instructions Manual

18
Press (GRAPHIC).
The display returns to the normal display.
Press (SCREEN) to turn to the Standard
mode.
Notes
• You can set the image format as follows:
GIF: 160 ×120 dots or less
• Up to 10 frames (or if image size is 84 ×84 dots or
less, up to 20 frames) of GIF animation will be
displayed.
• If a jacket picture (page 35) is set, the clip motion is
not displayed.
• You can preview up to 100 images from a folder
within a "Memory Stick" at one time.
• The following folders in a "Memory Stick" cannot be
displayed.
– CONTROL
– DCIM
– MSSONY
– VOICE
– HIFI
• In step 7 or 9, if there is no image data, "No Picture"
is shown in the display.
• Depending on the volume of stored data, the storing
time differs. Do not turn off the unit while the
message in step 17 is displayed. If you turn off the
power, the data will not be stored.
• If the capacity of the unit is not enough, "MEM FULL
– delete data" is displayed and you cannot store the
data. After deleting the data (page 39), perform the
settings again.
Tips
• You can store a maximum of 16 clip motions in the
unit.
• If "Cyber-shot" is selected in step 8, the folder is
selected automatically.
• Delete your stored image to display the default
source icon.
38
Displaying an image as a
slide show
— Slide Show (Slide show mode)
Scroll static images in a "Memory Stick" as a
slide show. (This data will not be stored.)
1
Insert a "Memory Stick" (page 10).
2
Press (GRAPHIC).
3
Press < or , repeatedly to select
"Slide Show."
Each time you press < or ,, the item
changes as follows:
Wall Paper y Panorama y Jacket
Pic y ClipMotion y Slide Show y
Picture Del y Char Setup
4
Press (ENTER).
5
Press M or m repeatedly to select a
folder for images that you want to set.
FolderSelect: Selects the folder that
contains the image you want to set.
Cyber-shot: If you want to set a picture
taken by an optional Sony digital still camera
Cyber-shot, select this.
OFF: Turns Slide show mode OFF.
6
Press (ENTER).
Select "FolderSelect" in step 5. If there are
images in folders of a lower layer, repeat step
5 and 6 to select the folder which contains
your desired image.
An image can be set in up to the 5th layer
folder in a "Memory Stick."
7
Press (GRAPHIC).
The display enters the Slide show mode, then
slide show starts.
Notes
• You can set the image format as follows:
JPEG: 1,600 ×1,200 dots or less
BMP, GIF, PNG: 640 ×480 dots or less
• You can set the display while playing back or
receiving a source only.
• You can select up to 100 images for each folder.
• The following folders in a "Memory Stick" cannot be
displayed.
– CONTROL
– DCIM
– MSSONY
– VOICE
– HIFI
• In step 6, if there is no image data, "No Picture" is
shown in the display.
• If you take out a "Memory Stick" after setting is
complete, display turns to the Clock mode.