Plan Your Installation; Step 6 - FrontRow CB200 Installer's Manual

Step 6:

Estimated time for this step: 5-10 minutes
Now it's time to decide where you'll place the CB2000 (note that if your installation is part of an ezRoom,
be sure to refer to the Installer guides for the various ezRoom components for best results). To help you
decide, we'll use the following layout of a typical classroom as an example:
Windows
Decide where to put the CB2000
We recommend locating the CB2000 where the instructor is likely to spend most of her or his time. In the example
below, we've placed the CB2000 conveniently near both the whiteboard and the teacher's desk.
A good place for the CB2000

Plan your installation

Top view of an example classroom
You'll install the CB2000
at teacher eye-level
where he or she is likely
to spend a lot of time.
16
Student desks
TV / VCR / DVD
Teacher's desk and
computer
White board
Tip
If using the TB14
to control devices
via IR signaling,
remember that
a cable length
of 15m/40ft is
allowed — so
select your
CB2000 position
accordingly.