These connectors are designed to allow direct contact with
conductive circuits. Weak voltage may be present because
of a failure in this unit. To prevent patients from touching
these connectors accidentally, attach the connector covers
when the connectors are not being used to connect to other
Connections and Settings
Production of some of the peripherals and related devices
described in this chapter has been discontinued.
For advice about choosing devices, please contact your
Sony dealer or a Sony sales representative.
Connecting an External Monitor
You can connect a video monitor to this unit's video output
connectors or to the MONITOR connector. The following
figure shows an example using a Sony multi-format LCD
You can also superimpose character information such as
timecode and the unit's operating status on output video.
For details, see "Superimposed Text Information" (page
To view HD video
Connect an HD video monitor using method 1 or 2 in
the following figure.
When you connect a monitor with method 2, set the setup
menu item INTERFACE SELECT >D-SUB OUTPUT to
"YPbPr" (see page 70).