This unit uses CD-ROM discs with the following mark. When you use this unit as a CD player, use compact discs with the following mark. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Apple iMac or USB equipped G3 Available USB port 32 MB of RAM or more MacOS 8.5 (USB manager 1.1) or higher IMPORTANT NOTE: For best results, Sony CD-R and CD-RW media should be used. Problem free operation cannot be guaranteed with other media. Introduction...
Location of controls Front panel The front panel controls are described below. Insert/Eject Button Power On/Off Indicator Headphone Jack Volume Busy Indicator CD Tray Control Rear panel The rear panel controls and connectors are described below. RCA Style Audio Outputs (cinch) Interface Connector Location of controls Precautions...
Hardware installation Step 1: USB (Universal Serial Bus) cable and connectors Connects to drive’s interface connector Connects to open USB port of PC or Macintosh The USB is easy to use and requires no adjustment of computer settings. USB ports and cables are identified by the USB symbol. One advantage of the USB connector is that it may only be inserted one way.
Insert the port connector of the USB cable into the PC’s USB port. Note: If no USB connector(s) available (already in use), see Troubleshooting, page 20. Then Windows will display the following message: Hardware installation Note: This will only appear the first time a USB device is connected. Click the Next>...
Accept the default and click Next>, the following message appears: Insert the floppy USB driver diskette and click Next> or select CD-ROM drive, (see below) and click Next>. Hardware installation The following message appears for the driver on floppy option (path may differ). Click Next>.
Now USB adapter driver will begin its installation automatically with: Click Next>, which will bring up the following screen: Hardware installation Then click Finish and check System Properties* (Device Manager) screen to assure proper installation. It should appear as illustrated. *System Properties is found by moving the cursor to My Computer icon, then clicking the opposite mouse button and selecting Properties.
Step 3: Attaching USB drive to Mac The following example will be for an iMac. G3 computers equipped with USB have a visible connector on the back, much like a PC. Unpack the included materials and locate the USB port symbol on the drive.
Software Installation Please refer to the CD-RW formatting software manual (on software CD) for instruction on software installation. Formatting software must first be properly installed in order to write CD’s with this drive. Operating the drive Starting the drive Turn on the drive. Press the eject button and the drive’s tray extends.