Tv Virtual Surround Settings (Tvs) - Sony DVP-NS333 Operating Instructions Manual

Sony cd/dvd player operating instructions
Hide thumbs Also See for DVP-NS333:
Table of Contents

Advertisement

TV Virtual Surround
Settings
(TVS)
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
If the player is set up to output the signal from
the DIGITAL OUT (COAXIAL or
OPTICAL*) jack, the surround effect will
only be heard when "DOLBY DIGITAL" is
set to "D-PCM" and "MPEG" is set to
"PCM" in "AUDIO SETUP" (page 65).
* For DVP-NS430/NS433 only.
1
Press SUR during playback.
The following display appears.
TVS DYNAMIC
2
Press SUR repeatedly to select
one of the TVS sounds.
Refer to the following explanations given
for each item.
• TVS DYNAMIC
• TVS WIDE
To cancel the setting
Select "OFF" in step 2.
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers (shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are
reproduced as shown in the illustration
below.
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
SUR
Large sounds, such as explosions, are
suppressed, but the quieter sounds are
unaffected. This feature is useful when you
want to hear the dialog and enjoy the
surround sound effects of "TVS WIDE" at
low volume.
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are
reproduced as shown in the illustration
below. Use this setting when you want to use
TVS with 2 separate speakers.
• TVS NIGHT
• TVS STANDARD
TVS DYNAMIC
TV
TVS WIDE
TV
TVS NIGHT
TVS STANDARD
49
,continued

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvp-ns330Dvp-ns430Dvp-ns433

Table of Contents