Interfacing; C411 Iii Pp; Connecting To Balanced Inputs - AKG C411 Series User Instructions

3

Interfacing

The C411
III
a power supply.
Using any power supply other than those recommended by AKG
may damage your pickup and will void the warranty.
3.1 C411 PP
III

3.1.1 Connecting to Balanced Inputs

1
MPA
Figure 1: Connecting to balanced inputs
1) Connect the phantom power adapter (1) on the pickup cable
to a balanced XLR microphone input with phantom power.
2) Switch the phantom power on. (Refer to the instruction manu-
al of the unit to which you connected your pickup.)
3) If your mixer provides no phantom power: Connect the phan-
tom power adapter (1) to an optional AKG phantom power
supply (2) and use an XLR cable (3) to connect the phantom
power supply to the desired balanced input.
C411 MANUAL
III
pickup is a condenser transducer and therefore needs
2
Phantom
2
3
1
1
MPA
MIC 1
3
INTERFAcINg
C411
III
Connecting
to balanced
inputs
MIC 2 MIC 3 MIC 4
2
3
1
PP
23