Siemens SIMATIC S7-400H System Manual page 16

Preface
1.1 Preface
Versions required or order numbers of essential system components
System component
External master on PROFIBUS DP
CP443-5 Extended
Communication module CP443–1
(Industrial Ethernet, TCP / ISO transport)
Communication module CP443–5 Basic
(PROFIBUS; S7 communication)
Note
There may be further restriction for various modules. Refer to the information in the
corresponding product information and FAQs, or in SIMATIC NET News.
Installing the STEP 7 hardware update
In addition to STEP 7, you also need a hardware update. You can download the update files
directly from the STEP 7 pages on the Internet. You can do this in "STEP 7 -> Configuring
Hardware" with the "Options-> Install Hardware Updates" menu command.
Certification
For details on certifications and standards, refer to the
Module Data
Position in the information landscape
This manual can be ordered separately under order no. 6ES7988–8HA11–8BA0. It is also
supplied in electronic format on your "STEP 7" product CD.
16
Version required or order number
Order no. 6GK7 443–5DX03–0XE0 hardware version 1 or higher, and firmware
version 5.1.4 or higher
Order no. 6GK7 443–5DX03–0XE0 hardware version 1 or higher, and firmware
version 6.4.0 or higher
6GK7 443–1EX10–0XE0, hardware version 1 or higher, and firmware version 2.6.7
or higher
6GK7 443–1EX11–0XE0, hardware version 1 or higher, and firmware version 2.6.7
or higher
6GK7 443–5FX02–0XE0 hardware version 2 or higher, and firmware version 3.2
or higher
manual, section 1.1, Standards and Certifications.
S7-400 Programmable Controllers,
System Manual, 09/2007, A5E00267695-03
S7-400H