Playing Tracks Repeatedly; Repeat Play; Playing Tracks In Random Order; Shuffle Play - Sony CDX-F5005X Operating Instructions (primary manual) Operating Instructions Manual

Playing tracks repeatedly

— Repeat Play

You can select:
• REP-TRACK — to repeat the current track.
• REP-ALBM* 1 — to repeat the tracks in the
current album.
2
• REP-DISC* — to repeat the tracks in the
current disc.
*1 Available only when an optional CD unit with the
MP3 file control function is connected, and MP3 file
is played.
*2 Available only when one or more optional CD/MD
units are connected.
During playback, press (3) (REP)
repeatedly until the desired setting
appears in the display.
Repeat Play starts.
To return to normal play mode, select
"REP-OFF."
Playing tracks in random
order

— Shuffle Play

You can select:
• SHUF-ALBM* 1 — to play the tracks in the
current album in random order.
• SHUF-DISC — to play the tracks in the current
disc in random order.
• SHUF-CHGR* 2 — to play the tracks in the
current optional CD (MD) unit in random
order.
3
• SHUF-ALL* — to play all the tracks in all
connected CD (MD) units (including this unit)
in random order.
*1 Available only when an optional CD unit with the
MP3 file control function is connected, and MP3 file
is played.
*2 Available only when one or more optional CD (MD)
units are connected.
*3 Available only when one or more optional CD units,
or two or more optional MD units are connected.
During playback, press (4) (SHUF)
repeatedly until the desired setting
appears in the display.
Shuffle Play starts.
To return to normal play mode, select
"SHUF-OFF."
Note
"SHUF-ALL" will not shuffle tracks between CD units
and MD units.

Labeling a CD

— Disc Memo (For a CD unit with the
CUSTOM FILE function)
You can label each disc with a custom name
(Disc Memo). You can enter up to 8 characters
for a disc. If you label a CD, you can locate the
disc by name (page 12).
1
Start playing the disc you want to label
in a CD unit with the CUSTOM FILE
function.
2
Press (LIST) (CAT) for 2 seconds.
The unit will repeat the disc during the
labeling procedure.
3
Enter the characters.
1 Press the volume +/– button to
select the desired character.
A B C
y y ...
+ –
y y y *
* (blank space)
2 Press (SEL) after locating the
desired character.
The next character flashes.
3 Repeat steps 1 and 2 to enter the
entire name.
4
To return to normal play mode, press
(LIST) (CAT) for 2 seconds.
Tips
• Simply overwrite or enter "
character.
• You can label CDs on a unit without the CUSTOM
FILE function if that unit is connected along with a
CD unit that has the function. The Disc Memo will be
stored in the memory of the CD unit with the
CUSTOM FILE function.
Note
REP-TRACK/SHUF play is suspended until the name
edit is complete.
continue to next page t
0 1 2
y y y ...
A
... y * y
" to correct or erase a
11