Recording a CD by Specifying Tape
Length (Time Edit) (continued)
3
Press TIME EDIT to have the player
create the programme.
The display shows the tracks to be recorded.
“TAPE B” flashes in the display.
4
When you record on both sides of the
tape, press TIME EDIT again.
The player inserts a pause, then creates the
programme for side B. The display shows
the programmed tracks.
When you record on one side of the tape or
on a DAT or MD, skip this step.
5
Start recording on the deck and then
press H on the player.
When you record on both sides of the tape,
the player pauses at the end of the
programme for side A.
6
Reverse the tape to side B and press
H or X on the player to resume
playing the remaining tracks.
To cancel Time Edit
Press PLAY MODE.
When using the remote, press CONTINUE.
Tips
• You can set the tape length freely using
l AMS L.
Example: When the tape length of one side is 30
minutes and 15 seconds
1 To set the minutes, turn l AMS
L until “30” appears in the display,
then pushl AMS L.
2 To set the seconds, turn l AMS
L until “15” appears in the display,
then pushl AMS L.
• To check and change your programme, see page 12.