Download Print this page

Electrolux EDV605HQWA User Manual page 8

Hide thumbs

Advertisement

8
www.electrolux.com
ANTI CREASE CYCLE
IN PROGRESS
To prevent creases forming in the
clothes after normal drying cycle has ended.
The Anti crease progress indicator will start
blinking during the time anti crease
phase is running.
END OF PROGRAM and
CLEAN FILTER REMINDER
When the drying program is completed,
the display will show text "End"
The Clean Filter LED turns on
and blinks at the end of each dry
cycle to serve as a reminder to
user to clean lint filter at the end
of each load.
START/PAUSE BUTTON
3
This button allows you to start or
pause the dryer to check the contents
or perhaps add more clothes.
NOTE: The dryer will not start
unless the door is closed.
(If door is not closed you
will hear 6 beeps and "E40"
on display.)
SETTING DRYING MODE
This mode gives you the option of
selecting different drying levels.
Touch this touch pad to select the
drying mode. Corresponding light for
each mode is shown on display.
Drying mode can only be selected
during initial set up.
• Fast
For small load
• Normal
For drying most fabrics.
• Gentle
For drying delicates and synthetics at
lower heat for maximum care of
the fabrics. The Low Heat setting will
cause the heater to cycle on for shorter
time than the normal setting.
• Airing :
This setting does not heat.
ONLY circulate the air in the dryer to
shake out dust and refresh clothes
4
Activating Child Lock
To activate Child Lock touch
and hold Dry Mode touch pad for 2 seconds.
Display will show "LOC" for
2 seconds then back to cycle duration.
Deactivating Child lock
To deactivate Child Lock touch
and hold Dry Mode touch pad for 2 seconds.
Display will show "unL" for
2 seconds then back to cycle duration.
Drying mode
CHILD LOCK

Hide quick links:

Advertisement

loading

  Related Manuals for Electrolux EDV605HQWA

This manual is also suitable for:

Edv705hqwa