Using The Display - Sony CDP-CX455 Primary Operating Instructions Manual

To Do this
Go to a specific track Press the number button of the track
directly Z on the remote. When you directly
locate a track numbered over 10,
press >10 first, then the
corresponding number buttons.
Examples:
•To select track number 30 on a CD
recorded with 50 tracks, press >10,
then 3 and 10/0.
•To select track number 30 on a CD
recorded with 200 tracks, press
>10, then 10/0, 3 and 10/0.
Go to a point in a Press m (backward)/M
track while monitoring (forward) on the remote and hold
the sound Z down until you find the point.
Go to a point in a track Press m (backward)/M
by observing (forward) on the remote and hold
the display Z down until you find the point
during pause. You will not hear the
sound during the operation.
Go to the next track Turn the l AMS L dial
(MP3 file*) clockwise by one click.
Go back to the Turn the l AMS L dial
preceding track counterclockwise by one click.
(MP3 file*)
Stop playing and Press OPEN/CLOSE.
remove the disc
* When "ALL DISCS" or "1 DISC" is selected, you can locate
all the MP3 files in the selected disc. When "ALBUM" is
selected, you can locate all the MP3 files in the selected
ALBUM.
z
When the TOC reading is completed
When MP3 files on the disc are played back, "MP3"
appears in the display.
z
When you turn off the player
The player remembers the last playing disc and the play
mode: Continuous (on page 12), Shuffle (on page 17), or
Program (on page 19). When you turn on the player
again, the player plays the same disc in the same play
mode.
Note
If " " appears in the large display, the disc has reached the
end while you were pressing M. Turn the l AMS L
dial counterclockwise or press m to go back.

Using the Display

You can check stored disc information, such as the Disc
Names (see page 23) or Artist Names (see page 27), by
using the display.
Unlike a normal CD, a CD TEXT disc includes
information such as the disc title or artist name. The
display shows the CD TEXT information so that you
can check the current disc title, artist name, and track
title. When the player detects a CD TEXT disc, "CD
TEXT" appears in the display.
DISPLAY TIME
Display information of the normal discs
Display information in stop mode
The display shows the current disc number, total
number of tracks, and total playing time of the disc.
Current disc number or Disc Name etc.
2nd NEXT DISC ART. HIT TRACK
* D I S C - 2 *
ALL 1 DISC S SHUFFLE REPEAT 1 GROUP
PROGRAM 1 2 3 X-FADE DELETE
MULTI CD TEXT NO DELAY CD1 CD2 CD3
Total number of tracks
NEXT DISC
2nd PLAYER
DISC
Current disc number
Playing CDs
Playing CDs
GROUP ART. MIN STEP SEC
0 * * * *
Total playing time
(continued)
GB
13