Looping Part Of A Disc (Loop) Z; Playing Your Favorite Disc Independently (Plus One Play) - Sony CDP-CX55 Operating Instructions Manual

Changing the programmed order
You can change your program before you start playing.
To
You need to
Erase a track or disc
Press CHECK until the track or
disc you do not want appears in
the display, then press CLEAR
Erase the last track or
Press CLEAR. Each time you
disc in the program press the button, the last track or
disc will be cleared.
Add tracks or discs to the
Follow the programming
end of the program
procedure
Change the whole Hold down CLEAR until "ALL
program completely
CLEAR" appears in the display to
erase the whole program, then
create a new program following
the programming procedure
Erasing the programs stored in memory
1
Press PROGRAM repeatedly in the stop mode
until the program number (PROGRAM 1, 2 or 3)
you want to erase appears in the display.
2
Hold down CLEAR until "ALL CLEAR" appears
in the display.
Looping Part of a Disc (Loop)
Z
You can repeat part of a disc during playback. This
function lets you create original recordings.
DISC SKIP +/–
Press and hold LOOP during playback at the point you
want to start the Loop function, and release to resume
normal play.
To adjust the loop length
Press DISC SKIP +/– while holding LOOP on the remote to
select different loop lengths (LOOP 1–20).
Playing Your Favorite Disc
Independently (Plus One Play)
When you insert a disc into the PLUS ONE slot, you
can play the disc independently from other discs.
When using this function, the player is automatically
set to 1 DISC Continuous Play mode.
1
Open the front cover.
2
Press PLUS ONE.
The indicator on the PLUS ONE button lights up.
The PLUS ONE slot comes to the loading position.
LOOP
Playing CDs
Getting Started Playing CDs
Front cover
PLUS ONE
DISC
* D I S C - P L U S 1 *
PLUS ONE slot
CD1
P 1
(Continued)
19