Sony CDP-CX50 Operating Instructions Manual page 7

Getting Started
3
Turn the JOG dial until you find the disc slot
where you want to insert a disc, while checking the
disc number (written beside every slot and also
indicated in the display).
Disc slot at the loading position
The disc number at the loading position appears in
the display.* As you turn the JOG dial, the disc
number changes.
ALL DISC S
d SC
You can play the disc you want independently by
using the Plus One function. When using this
function, insert the disc into the PLUS ONE slot.
For details, see "Playing Your Favorite Disc
Independently" on page 14.
* If you have already inserted discs, the disc number at
the playing position appears. When you turn the JOG
dial, the displayed disc number changes to the one at
the loading position.
4
Insert a disc with the label side facing right.
Notes
• Make sure you have inserted the disc into each slot at
a right angle to the rotary table. If the disc is not put
in straight, it may damage the player or the disc.
• Make sure the rotary table comes to a complete stop
before inserting or removing discs.
With the label
side facing right
6
Disc number
1 2 3 4 5 6 7 8
1
2 0
Disc number
5
Repeat Steps 3 and 4 to insert more discs.
6
Close the front cover by pushing the right edge of
the cover until it clicks.
The rotary table turns and the disc slot at the
loading position is set to the playing position.
Always close the front cover except when you
insert or remove discs.
The supplied CD booklet holder helps you locate a
disc
You can store up to 100 CD booklets.
Notes
• Do not insert an empty 8 cm (3-inch) CD adaptor (CSA-8). It
may damage the player.
• Do not attach anything such as seals or sleeves to CDs. It may
damage the player or the disc.
• If you drop a disc into the player and the CD won't go into
the slot correctly, consult your nearest Sony dealer.
• When transporting the player, remove all discs from the
player.