General - Sony BRAVIA KLV-50W672G Reference Manual


If the LAN cable is connected to an active server
and the TV has acquired an IP address, check your
media server's connections and configurations.
Note

Your IP address configuration can be viewed by
selecting the [View Network setting and status]
option.
Media server is inaccessible although it is
listed under [Media] in the Home Menu

Check your LAN cable/connection or your server
connections. The TV may have lost connection
with the server.

Perform [Server Diagnostics] to check if your
media server is properly communicating with the
TV. Press HOME, then select [Settings]*
t
[System Settings]
[Home Network Setup]
Note

Connection to all media servers are not
guaranteed.
When using the renderer function, music files
cannot be played back

Some applications display a photo file pre-
installed in the PC simultaneously with music
playback when using the renderer function.
Depending on the pre-installed photo file, music
playback may not be possible, but may become
possible by changing the photo file.
You could not connect Internet

Check that the LAN cable or AC power cord (mains
lead) of the router/modem* has been connected
properly.
* Your router/modem must be set in advance to
connect to the Internet. Contact your Internet
service provider for router/modem settings.
You do not have YouTube ID

If you do not have a YouTube ID and password,
register them through the address below.
http://www.google.com/device
(You can also register a YouTube ID and password
from your PC.)
After registering your ID, you can use it
immediately.

General

The TV turns off automatically (the TV enters
standby mode)

Check if the [Sleep Timer] is activated (page 19).

Check if the [Duration] is activated by [On Timer]
(page 19) or [Photo Frame Settings] (page 19).

Check if the [Idle TV Standby] is activated
(page 22).
t
t t
[Setup] [Network]
t
[Server Diagnostics].
Some input sources cannot be selected

Select [Video Labels] and select [Always] of the
input source (page 20).
Some programmes cannot be tuned

Check the antenna (aerial)/cable connection.
The remote control does not function

Replace the batteries.
HDMI equipment does not appear on [BRAVIA
Sync Device List]

Check that your equipment is compatible with
BRAVIA Sync Control.
Cannot select [Off] in [BRAVIA Sync Control]

If you have connected any audio system that is
compatible with BRAVIA Sync Control, you cannot
select [Off] in this menu. To change the audio
output to the TV speaker, select [TV Speakers] in
the [Speakers] menu (page 20).
The [Parental Lock] password has been
forgotten

Enter 9999 for the PIN code.

Update PIN code by pressing HOME and select
t
[Settings]* [System Settings]
t
Lock] [Change PIN Code].
Store Display Mode or Promoting Feature
Logo appears on the screen

On the remote control, press RETURN then press
HOME and select [Settings]*
t [Setup] t [Auto Startup]. Be sure to select
[Home] in [Location].
The TV surrounds become warm

When the TV is used for an extended period, the
TV surrounds become warm.
You may feel hot when touching there by the
hand.
* Only on limited region/country/TV model.
t
[Parental
t
[System Settings]
31
GB