Table of Contents
Advertisement
Programme Labels
Assign a channel name of your choice up
to seven letters or numbers.
Manual Programme Preset
Before selecting [Channel]/[AFT]/[Audio
Filter]/[Skip]/[Colour System], press
PROG +/– to select the programme
number with the channel. You cannot
select a programme number that is set to
[Skip] (page 18).
Programme/TV System: Presets
programme channels manually.
Channel: Selects a channel number.
AFT: Allows you to fine-tune the
selected channel manually. When
[On] is selected, the fine tuning is
performed automatically.
Audio Filter: Improves the sound of
individual channels when distortion
occurs in mono broadcasts in TV
system [B/G], [I], [D/K] and [M].
Note
• You cannot receive stereo or dual sound
when [Low]/[High] is selected.
Skip: Skips unused channels.
Colour System: Select the colour
system according to the channel.
Signal Level: Displays the signal level for
programme currently being watched.
FM Radio Setup
Presets up to 30 FM radio channels that
can be received in your area.
Auto Tuning: Allows you to
automatically tune and store all the
available channels.
FM Radio Presets: Allows you to
manually tune and store each
available channel one at a time.
Note
• To enable this feature, access to FM Radio
mode by using Home (Menu) (page 12), then
preset your desired FM radio channels
according to the steps mentioned above.
18
GB
Parental Lock
PIN Code
Sets a PIN code. Use 0-9 on the remote
control to enter a four-digit PIN code.
Change PIN Code
Select to change your PIN code.
Programme Block
Locks a channel from being watched. To
view a blocked channel, select
[Unblocked].
External Input Lock
Locks an external input from being
watched. To view a blocked external input,
select [Unblocked].
Note
• Entering the correct PIN code for blocked
channel or external input will temporarily
deactivate the [Parental Lock] feature. To
reactivate the [Parental Lock] settings, turn off
and on the TV.
Hint
• If you lost your PIN code, see page 33.
Internet Lock (Except KLV-32R422G)
Locks internet content from being
watched. To view a internet content,
select [Unblocked].
Setup
Network (Except KLV-32R422G)
Network Setup: Sets the network
status settings.
USB Tethering Status: Displays the USB
Tethering status.
IPv6/IPv4 Priority: Switch between
[IPv6] and [IPv4 (Recommended)].
Note
• To use the network with [IPv6], select [IPv6],
then select [Easy] in [Set up network
connection].
• When IPv6 is selected, HTTP Proxy cannot
be set.
• When IPv6 is selected, some Internet
browser sites, applications or contents
cannot be watched.
Hide quick links:
Advertisement
Table of Contents
