1
2
3
1. Projection
2. Seat holder
To install the seat
1. Insert the projection on the front
of the seat into the seat holder
as shown.
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly
secured before riding.
INSTRUMENT AND CONTROL FUNCTIONS
Helmet holder
1. Helmet holder
The helmet holder is located under
the seat.
To secure a helmet to the helmet
holder
1. Remove the seat. ( See page 3-9
for removal and installation proce-
dures.)
3-10
2. Attach the helmet to the helmet
holder, and then securely install
the sea t. WARNING! : Never
ride with a helmet attached to
the helmet holder, since the hel-
met may hit objects, causing
loss of control and possibly
an accident.
To release the helmet from the
helmet holder
Remove the seat, remove the hel-
met from the helmet holder, and
then install the seat.
3