INSTRUMENT AND CONTROL FUNCTIONS
Tachometer
1
3
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle will sweep once
across the r/min range and then return
to zero r/min in order to test the electri-
cal circuit.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 10500 r/min and above
Multi-function display
2
2
1. Multi-function display
2. "RESET/SELECT" button
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function
settings while riding can distract the
operator and increase the risk of an
accident.
The multi-function display is equipped
with the following:
a speedometer
an odometer
1
TIP
Be sure to turn the key to "ON" before
using the "RESET/SELECT" button.
Odometer and tripmeter modes
A brief push (less than one second) on
the "RESET/SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
display.
Changing
"TRIP 1" and "TRIP 2" in the following
order:
ODO
When approximately 1.9 L (0.50 US
gal, 0.42 Imp.gal) of fuel remains in the
fuel tank, the odometer display will au-
tomatically change to the fuel reserve
tripmeter mode "F-TRIP" and start
counting the distance traveled from
3-3
two tripmeters (which show the
distance traveled since they were
last set to zero)
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
a fuel meter
TRIP 1
TRIP 2
ODO